Before you relpace anything, make sure your ignition relay is grounded
correctly. I had that problem and after removing the relay and cleaning the
ground point, everything worked fine.
----- Original Message -----
From: <FRITZWICH(at)aol.com>
To: <ian(at)sunbeamalpine.org>; "Alpine List" <alpines(at)autox.team.net>
Sent: Sunday, June 04, 2000 10:20 AM
Subject: Re: Ignition problems again...
> Ian...
> I had a similar problem with my Series 5 Alpine. I replaced the Ignition
> Light relay. I also replaced the Field Isolating relay at the same time
so I
> can't really say which relay did the trick but if I were to choose one I'd
> say the former.
> ...Rich
>
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:02:47 CDT