Re: Master Cylinder

From: jumpin'jan (servaij(at)cris.com)
Date: Wed Jun 07 2000 - 22:05:42 CDT

Next message: Marc James Small: "Re: Master Cylinder"
Previous message: chuck nicodemus: "Re: Master Cylinder"
In reply to: GSTROM99(at)aol.com: "Re: Master Cylinder"
Next in thread: chuck nicodemus: "Re: Master Cylinder"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Gary,
One really can't get a brake cylinder hone in there and really it
should be polished with 400-600 paper especially the aluminum brake
masters. The hone is fine for the cast iron slave, but I wouldn't use
one in the master cylinders.
Jan

-- 
   ______  ______  _______
  / ____/ / ____/ / ___  / 
 / /___  / /___  / /__/ /   _|  _   _  .  _   _   _
/___  / /___  / / __  _/   (_|_(/_ /_)_|_(_|_| )_/_)
___/ / ____/ / / /  \ \                   _|
____/ /_____/ /_/    \_\http://mall.turnpike.net/~servaijm

Next message: Marc James Small: "Re: Master Cylinder"
Previous message: chuck nicodemus: "Re: Master Cylinder"
In reply to: GSTROM99(at)aol.com: "Re: Master Cylinder"
Next in thread: chuck nicodemus: "Re: Master Cylinder"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:02:59 CDT