Does anyone know where the windshield washer button is located on a Series I
Alpine? I picked up tje pumper at a swap meet and it doesn't fit any of the
holes in the lower left side of the dash.
Lynn Cardwell
Series I
ola.edu (Christopher Albers)
To: william.lewis(at)ucdmc.ucdavis.edu
Cc: alpines(at)autox.team.net
Date: Mon, 10 Jul 2000 18:26:10 -0700
Subject: Re: Overdrive wiring harness
Message-Id: <msg632528.thr-4c5e2f53.a2c2a(at)bubbs.biola.edu>
References: <OFA3E60FE4.694E37C2-ON88256918.0054F34C(at)ucdmc.ucdavis.edu>
Organization: Biola University
Mime-Version: 1.0
Content-Id: <msg632528.thr-4c5e2f53.a2c2a.part0(at)bubbs.biola.edu>
X-Gateway: NASTA Gate 2.0 for FirstClass(R)
Sender: owner-alpines(at)autox.team.net
Reply-To: Christopher.Albers(at)bubbs.biola.edu (Christopher Albers)
william.lewis(at)ucdmc.ucdavis.edu writes:
>Does the wiring harness run from the solenoid on the firewall straight
>down
>to the overdrive, or does it run back along the firewall to the drivers
>side and then down with the other wiring harnesses that are running to
>the
>back of the car?
It runs straight down to the OD unit.
CNA
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:05:25 CDT