>How is it possible for an overdrive unit to be engaged all the time?
>Everything is wired correctly with an on/off light but yet it appears
>the car starts out with the OD gears already meshed and running.Brent
Not likely, this would require a major internal modification to permanently
lock the cone clutch onto the brake plate.
Easy test though, just lift a wheel off the ground.
Put the trans in 4th.
Mark the drive shaft in its 6:00 o-clock position.
Manually turn the engine exactly 1 turn.
Look at the drive shafts position.
Still 6:00 o-clock? No OD.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:05:33 CDT