Frank writes: The machinist who will be working on the motor requires that I
first get the crank turning (indicating the pistons are not "seized" in the
cylinders).
Frank,
How much work are you comfortable doing yourself? Have you ever disassembled a
motor? You have to pull the motor to take it to a machine shop which, requires
a lot of wrenching and mechanical skills. Once you've gone that far, placing
the engine on an engine stand and breaking it down isn't much more work. Once
it's on an engine stand you can pull the oil pan, pull the cylinder head,
check the crankshaft, etc. However, you're getting very involved at that
point.
If that sounds like too much to take on, you should see if you can get a local
mechanic to tear it down for you. Too bad, you don't live closer. I'd help you
do it.
Thanks,
Dan McHatton
'66 1600
____________________________________________________________
Best Weight Loss Program - Click Here!
http://thirdpartyoffers.juno.com/TGL2131/fc/BLSrjnsEGrDx65aB7cg2xvkOcUHMeu8ho
YAZta0qbieQooOcqrino1fGeo4/
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|