Greg,
I'll echo Dan's comment about lubricating the speedo cable -- there is a
graphite-based cable lube in liquid form (powered graphite in a liquid
carrier) which will go down the annulus between the cable and sheath nicely.
If it weren' such a b____ getting the cable off the trans end, I'd pull the
cable to lube it -- that way you're sure to get lubricant all the way
through.
Other than that, hook it up and go.
Gary
----- Original Message -----
From: "Gregory S. Morrison" <gsm@gregorysmorrison.com>
To: "'Datsun Mailing List'" <datsun-roadsters@autox.team.net>
Sent: Tuesday, March 02, 2010 1:21 PM
Subject: [Roadsters] Speedometer installation
>I am about to reinstall my rebuilt (thanks again Jon Frampton) speedometer
> in my '67 2000. My plan was to just reconnect everything and call it good
> but I can't remember if there are any hints or tips that are "must dos"
> for
> this procedure. Is there anything I should/should not be doing in addition
> to merely reconnecting it?
>
> Thanks,
> Greg
> SRL31100494
> Spokane, WA
> ________________________________________
> Datsun-roadsters@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $16.00
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/datsun-roadsters/aultgc@att.net
________________________________________
Datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|