Wildwood Master cylinders have the same mounting flange bolt spacing as
girlings, and are available in all kinds of sizes.
-----Original Message-----
From: WEmery7451@aol.com [mailto:WEmery7451@aol.com]
Sent: Wednesday, August 28, 2002 5:53 AM
To: Bill Babcock; tony@tonydrews.com; fot@autox.team.net
Subject: Re: Master Cylinder
About five years ago, when SCCA imposed the dual braking system, I ordered
a
system from RevingtonTR in England. It consists of two of the same size
master cylinders (with clutch cylinder) to work with a balance bar, and
bolts
right in where the stock system was, with a small amount of metal cutting.
It uses the existing peddle setup.
You have to push harder on the brake, but at that time the instructions
said
there were no smaller master cylinders available.
I never looked into the Wildwood system. It might be better:
Info@revington.com
or
revington@compuserv.com
|