fot
[Top] [All Lists]

RE: Initial SU setup?

To: <fot@autox.team.net>
Subject: RE: Initial SU setup?
From: "Barr, Scott" <sbarr@mccarty-law.com>
Date: Mon, 15 Sep 2003 09:53:33 -0500
<< HS6's on a stock compression 1500, you say?  ... BACK IN THE BOX ... way
too much carb for the little engine. >>

Yeah, I was wondering about that.  The carbs are actually the ones for the 
engine that's still at the machine shop, which will be much hotter.  My 
choices, however, are the following: rasty mouse-filled stock Stromberg that 
came with the $50 motor; really nice DCOE40 Webers :-) (but CLEARLY too much 
for the car); or the SUs; or nothing.

Hmmm, if I could find a manifold for ONE Weber, how do you suppose THAT would 
work?

Scott


-----Original Message-----
From: Joe Curry [mailto:spitlist@COX.NET]
Sent: Monday, September 15, 2003 9:47 AM
To: Barr, Scott; fot@autox.team.net
Subject: RE: Initial SU setup?


HS6's on a stock compression 1500, you say?  I think your initial
settings should be... BACK IN THE BOX!  I would think that those are way
too much carb for the little engine.  

Joe (C)

-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On
Behalf Of Barr, Scott
Sent: Monday, September 15, 2003 7:25 AM
To: fot@autox.team.net
Subject: Initial SU setup?

OK, so now that the Spit is on the track I'll have to make it run.
Looking for suggestions on a starting place for the carbs.  HS6s running
on a 1500 motor I purchased for $50 out of some guy's garage -- 7.5:1
compression (when it was new, anyway).

The car will presently cough and wheeze its way around the track between
3000 and 4200 revs.  Won't push beyond 4200.  New points, coil, wires...

Suggestions on an initial setting for the carbs?

<Prev in Thread] Current Thread [Next in Thread>