Jack,
I used the 3/8" to 8AN Gauge Adaptor fitting (Russell #670080). I drilled
and tapped directly into the oil gallery that runs along the side of the TR4
block. Works a treat.
Cheers
Peter V
WORKS-4
----- Original Message -----
From: "Jack W. Drews" <vinttr4@geneseo.net>
To: <FOT@autox.team.net>
Sent: Thursday, June 24, 2004 7:24 AM
Subject: Accusump plumbing
> I plan to plumb the new Accusump directly into the oil gallery, since I
> have the engine out and can drill and tap properly.
>
> The Accusump comes with 1/2 NPT ports. Tapping the block for this size
> seems pretty big but I do want good flow.
>
> Fittings seem to come with 3/8 NPT to 6 or 8AN, and 1/2NPT to 8 or 10AN.
>
> My tendency is to use 3/8NPT to 8AN.
>
> Question for you guys who are plumbed this way -- which size do you use?
>
> uncle jack
|