fot
[Top] [All Lists]

RE: Speedbleeders

To: "'Justin Wagner '" <jmwagner@greenheart.com>
Subject: RE: Speedbleeders
From: Bill Babcock <BillB@bnj.com>
Date: Sun, 13 Mar 2005 10:57:50 -0800
 Yeah. Like I said, spacy in the mornings. 

-----Original Message-----
From: Justin Wagner
To: Bill Babcock
Cc: 'Rocky Entriken'; WEmery7451@aol.com; mcandrew@pol.net;
fot@autox.team.net
Sent: 3/13/2005 10:53 AM
Subject: Re: Speedbleeders

I's www.speedbleeder.com <http://www.speedbleeder.com>    ..... no 's'
on the end....    ---Justin



Bill Babcock wrote:


www.speedbleeders.com <http://www.speedbleeders.com>   The ones for
Tiltons or wilwood superlights fit

Girlings. The tilton small master cylinders are diecast girlings,
basically.

All the parts except the outlet fitting (deep AN-3) are interchangeable.




-----Original Message-----

From:  owner-fot@autox.team.net <mailto:owner-fot@autox.team.net>  [
mailto:owner-fot@autox.team.net <mailto:owner-fot@autox.team.net> ] On
Behalf

Of Rocky Entriken

Sent: Sunday, March 13, 2005 12:55 AM

To:  WEmery7451@aol.com <mailto:WEmery7451@aol.com> ;  mcandrew@pol.net
<mailto:mcandrew@pol.net> ;  fot@autox.team.net
<mailto:fot@autox.team.net> 

Subject: Re: Speedbleeders



Bruce Wentzel sells them. He'd know.



Not on FOT list (he's a Corvette guy). I got mine from him 2-3 years
ago.



Bruce is at  greendot1@comcast.net <mailto:greendot1@comcast.net> .



Or you can get them from Solo Performance Specialties --

www.soloperformance.com <http://www.soloperformance.com>  -- tell him
(Dave Whitworth) what your car is and he

supplies the part.



--Rocky Entriken



----- Original Message -----

From:   <mailto:WEmery7451@aol.com> <WEmery7451@aol.com>

To:   <mailto:mcandrew@pol.net> <mcandrew@pol.net>;
<mailto:fot@autox.team.net> <fot@autox.team.net>

Sent: Sunday, March 13, 2005 12:24 AM

Subject: Re: Speedbleeders





  

In a message dated 3/12/05 4:39:37 PM Pacific Standard Time, 

mcandrew@pol.net <mailto:mcandrew@pol.net> 

writes:



<< Does anyone use and/or know the part numbers for Speedbleeders for
1957

TR3 Girling brakes/clutch hydraulics >>



I imagine that you are talking about something more exotic than this.

Advanced Auto Parts stores sell an inexpensive vacuum pump for bleeding 

brakes and

hydraulic clutches.  Connect the hose to the bleed valve, open the bleed


valve,

suck out brake fluid until the bubbles disappear, and close the bleed 

valve.

It has worked very well for me, especially since the three kids are
gone, 

and

my wife has no desire to pump the brake and clutch peddles.

<Prev in Thread] Current Thread [Next in Thread>