fot
[Top] [All Lists]

Re: [FOT] TR6 alternative pistons

To: <fot@autox.team.net>
Subject: Re: [FOT] TR6 alternative pistons
From: "Kas Kastner" <kaskas@cox.net>
Date: Wed, 15 Mar 2006 12:56:20 -0800
Having made lots of small parts like buttons, the easy way I found was to
grind a piece of tool steel to the rounded shape and it's then a one hit
operation,  a parting tool and another piece squared off and brazed together
for the part that fits inside the pin and you are finished with tooling that
can make buttons in a couple minutes each and the tooling will only last
FOREVER. Delrin machines like aluminum, easy.

Never Be beaten by Equipment
Kas Kastner



<Prev in Thread] Current Thread [Next in Thread>