fot
[Top] [All Lists]

RE: [FOT] Fuel Pressures

To: <WEmery7451@aol.com>, <fot@autox.team.net>
Subject: RE: [FOT] Fuel Pressures
From: "Kramer, Robert" <RKramer@rdoequipment.com>
Date: Wed, 2 Aug 2006 07:14:50 -0500
I had similar problems in my TR4 and the gauge in the dash always showed
pressure. I eventually solved it by putting a 2" o-ring between the
manifold and the phenolic spacer. I used a hole saw to cut a groove in
the phenolic spacer and sourced some slightly longer studs.

Bob Kramer
Sales Manager
16415 North IH35
RDO Equipment Co.
Pflugerville, TX  78660
800-775-3838

-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On
Behalf Of WEmery7451@aol.com
Sent: Tuesday, August 01, 2006 10:54 PM
To: fot@autox.team.net
Subject: [FOT] Fuel Pressures

Dear FOT,

I would like to thank everyone for all of the fuel pressure responses.
The 
engine is breaking up at about 5,000 RPM at the of the back straight.
Before, 
it has always been the fuel pump (I assume losing flow capability).  As 
outlined below, mounting the gage in the cockpit where I can see it
would provide 
more valuable information:

Subj:   Re: [FOT] Fuel Pressure
Date:   7/31/06 11:34:47 AM Pacific Daylight Time
From:   WEmery7451
To: BillDentin

In a message dated 7/31/06 10:26:32 AM Pacific Daylight Time, BillDentin

writes:

<< What becomes an issue, is whether your fuel pressure remains
constant, all 
the way around the track.  Do you run a fuel pressure gauge? >>

Hi Bill,

We just mounted a fuel pressure gage under the hood.  To mount one in
the 
cockpit would require some conversion unit from PEGASUS mounted under
the hood.  
They do not want fuel running into the cockpit.

There is practically no room under the hood.  There are so many gages in
the 
cockpit now that I would have to mount it where I would have to stretch
my 
neck to see it.  I would then run off of the track.  It would be more
valuable by 
indicating in the cockpit where I could see it.





<Prev in Thread] Current Thread [Next in Thread>