fot
[Top] [All Lists]

Re: [Fot] GT6 Header

To: "Barr, Scott" <sbarr@McCarty-Law.com>, "KEVIN LYNCH"
Subject: Re: [Fot] GT6 Header
From: "Scott Janzen" <S.Janzen@comcast.net>
Date: Tue, 7 Aug 2007 08:46:37 -0400
You are correct about the exposed pushrod tubes/castings.  Don't know about 
the studs.  Kastner's first book addresses the differences and suggests not 
bothering with the early head for performance use.
----- Original Message ----- 
From: "Barr, Scott" <sbarr@McCarty-Law.com>
To: "KEVIN LYNCH" <klynch_6@msn.com>; <fot@autox.team.net>
Sent: Tuesday, August 07, 2007 8:08 AM
Subject: Re: [Fot] GT6 Header


> << my question is "how early is early? >>
>
> I'm not certain of it, but it may be for the Mk I head (pre-TR250, I
> believe) - the one with the exposed pushrod tubes.   The stud-holes at
> the outer ends of the header (fore and aft) are at 3 o'clock and 9
> o'clock, rather than being diagonally oriented across those ports.  I
> checked it against one of my later GT6 heads.  That later head had the
> stud-hole at 1 o'clock in the case of the port for #1 cylinder's exhaust
> valve.
>
> Scott B.
>
> ________________________________
>
> From: KEVIN LYNCH [mailto:klynch_6@msn.com]
> Sent: Monday, August 06, 2007 8:20 PM
> To: Joseph Siam; fot@autox.team.net; Barr, Scott
> Subject: Re: [Fot] GT6 Header
>
>
> Scott, guess my question is "how early is early? Sort of unlikely anyone
> would want a Mk1 head.   Especially for racing purposes?  <grin>
> During the winter Joe, there was talk of a few of us having a couple
> made.  Nothing in stone but will keep ya posted.  kevin
>
> ----- Original Message -----
> From: Barr, Scott <mailto:sbarr@McCarty-Law.com>
> To: Joseph Siam <mailto:jsiam1@earthlink.net>  ;
> fot@autox.team.net
> Sent: Monday, August 06, 2007 6:06 PM
> Subject: Re: [Fot] GT6 Header
>
> And it turns out that I may have a header for an early GT6 head,
> if
> anyone's interested.
>
> Scott B.
>
> -----Original Message-----
> From: fot-bounces+scott.barr=mccarty-law.com@autox.team.net
> [mailto:fot-bounces+scott.barr=mccarty-law.com@autox.team.net]
> On Behalf
> Of Joseph Siam
> Sent: Monday, August 06, 2007 6:54 PM
> To: fot@autox.team.net
> Subject: [Fot] GT6 Header
>
> Hi All I am still looking for a GT6 header.  thanks   Joe
> scott.barr@mccarty-law.com
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> http://www.team.net/donate.html
>
> klynch_6@msn.com
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> http://www.team.net/donate.html
>
> s.janzen@comcast.net
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>