fot
[Top] [All Lists]

Re: [Fot] TR3 bore sizes?

To: Bill Babcock <BillB@bnj.com>, "Mark J. Bradakis"
Subject: Re: [Fot] TR3 bore sizes?
From: A Daniel Cronin <adcronin@ameritech.net>
Date: Wed, 29 Aug 2007 16:56:17 -0700 (PDT)
Had an email comunication with Ken late last week to see if he had 92's and his 
response was that he did not due to difficulties with machining, etc.

Bill Babcock <BillB@bnj.com> wrote:  Yup, Ken gillanders has nice flat top 
wisecos and sleeves from LA Sleeve. I'm
going to use the 92mm in my street TR3.

-----Original Message-----
From: fot-bounces+billb=bnj.com@autox.team.net on behalf of Mark J. Bradakis
Sent: Tue 8/28/2007 9:00 PM
To: FOT@autox.team.net
Subject: [Fot] TR3 bore sizes?

So this local club member brings in his TR6 for some work (stuck
Grose Jet in rear carb) and we start talking about his TR3 project.

Can 89 mm piston sets be had that will make a reliable, streetable
motor?

mjb.
billb@bnj.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
adcronin@ameritech.net
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot



Planning & Development Services
A. Daniel Cronin
248 761-2673
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>