fot
[Top] [All Lists]

[Fot] Fwd: FW: More Oil Info

To: Joe Boruch <jaboruch@netzero.net>
Subject: [Fot] Fwd: FW: More Oil Info
From: Allen Washatko <awashatko@wi.rr.com>
Date: Tue, 8 Jan 2008 23:21:47 -0600
Joe,

For a good overview, check out the article noted below as  
www.inengineering.com/oil.html

Allen


Begin forwarded message:

> From: Norlin Engineering <norlinengineering@comcast.net>
> Date: March 16, 2007 12:21:33 PM CDT
> To: FOT <fot@autox.team.net>
> Cc: lwdent@localnet.com
> Subject: [Fot] FW: More Oil Info
>
> Forwarded by request - This was sent out yesterday to an informal  
> group of
> Pacific Northwest Vintage Racers.  Some of it we have already seen,  
> but some
> is new to me at least.
>
> Jim Norlin
>
>
>
> Another non synthetic oil that still has the "good" additives is Shell
> Rotella.  Comp Cam and Crane both make a break in additive to make  
> sure that
> whatever oil you use does not wipe the cam lobes during break in.   
> JEG"S has
> it at about $8.00 a pint.
>
> The additives have changed due to increased pressure from the Feds on
> immisions and heavy metals.  Zink is not the only additive to get  
> reduced.
>
> the critical time is for break in, but engines such as our racing  
> engines
> likely will suffer higher wear during their life cycle with many of  
> the new
> oil formulations.
>
> CompCam did Tech bulletin #225 on 4-10-06 on this subject.  I am  
> attaching
> it as a PDF file but it may not be accepted by the talk line.
> Here is a link:
> <http://www.compcams.com/information/whatsnew/NewsDetails.asp? 
> ListHistoryID=
> 1821071676>
>
> anyone that does not get it and is interested in seeing it e mail me  
> direct
> and off the vintage line and I will be happy to forward it to you  
> directly.
> It is very interesting.
>
> Another long but informative article on current oil problems can be
> found here.   www.lnengineering.com/oil.html.
>
> Also, anyone on the Friends of Triumph line might want to forward this  
> to
> that group as I am not a member and this message will be rejected by  
> their
> monitor.
>
> Bottom line is that many current oils are not good for flat tappet  
> break in,
> even with the highest API ratings!  They are also doubtful for maximum  
> life
> in a racing engine.
>
> Larry Dent
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
>
Jody & Allen Washatko
N65 W5567 Columbia Road
Cedarburg, WI. 53012
USA

tel. (262) 375-6888
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>