fot
[Top] [All Lists]

Re: [Fot] inside wheel lift

To: "Marx Christian tr4-racing" <chris@tr4-racing.de>
Subject: Re: [Fot] inside wheel lift
From: westerneagleracing@att.net
Date: Tue, 05 Feb 2008 17:14:29 +0000
I have the swaybars and still get a lot of lift most notably at Sears Point (ok 
Infinion).  We lowered the car during the post season so I don't know yet if 
that will help.  I know that some guys have swithch to some type of locking 
read end as a solution. Gary- are you following this thread?
Ron Jacobs
Western Eagle Racing
-------------- Original message from "Marx Christian tr4-racing" 
<chris@tr4-racing.de>: -------------- 


> I had this trouble too at my first race: 
> http://www.tr4-racing.de/pic/2004/colmer/DSC_0084_ex.jpg 
> Like a sailingboat at strong half wind. 
> 
> I cured it with swaybars at front and rear and I brought up the front 
> suspension spring rate. 
> At the rear I still use the standard leaf springs. 
> Have a look now: 
> http://www.tr4-racing.de/pic/2006/rgb/217-6901a_ex.jpg 
> 
> Cheers 
> Chris 
> ----- Original Message ----- 
> From: Tony Drews 
> To: triumph_marx@freenet.de 
> Sent: Sunday, February 03, 2008 3:49 AM 
> Subject: Fwd: [Fot] inside wheel lift 
> 
> 
> 
> 
> Delivered-To: tony@tonydrews.com 
> X-Virus-Scan: Scanned by clamdmail 0.15 (no viruses); 
> Sat, 02 Feb 2008 17:56:20 -0600 
> X-Original-To: fot@autox.team.net 
> Delivered-To: fot@autox.team.net 
> Date: Sat, 02 Feb 2008 18:52:20 +1100 
> From: "Steven Preiss" 
> To: 
> X-Mailer: Microsoft Outlook Express 6.00.2800.1807 
> X-Converted-To-Plain-Text: from multipart/alternative by demime 1.01d 
> X-Converted-To-Plain-Text: Alternative section used was text/plain 
> Subject: [Fot] inside wheel lift 
> X-BeenThere: fot@autox.team.net 
> X-Mailman-Version: 2.1.9 
> List-Id: Friends of Triumph 
> List-Unsubscribe: < http://autox.team.net/mailman/listinfo/fot>, 
> < mailto:fot-request@autox.team.net?subject=unsubscribe> 
> List-Archive: < http://autox.team.net/archive> 
> List-Post: < mailto:fot@autox.team.net> 
> List-Help: < mailto:fot-request@autox.team.net?subject=help> 
> List-Subscribe: < http://autox.team.net/mailman/listinfo/fot>, 
> < mailto:fot-request@autox.team.net?subject=subscribe> 
> Sender: fot-bounces+tony=tonydrews.com@autox.team.net 
> X-Spam-Checker-Version: SpamAssassin 3.0.2 (2004-11-16) on localhost 
> X-Spam-Status: No, score=0.4 required=5.0 tests=DATE_IN_PAST_12_24 
> autolearn=disabled version=3.0.2 
> X-Spam-Level: 
> 
> 
> ...it seems that I'm lifting the rear inside wheel too much when I see 
> photos 
> of the car in tight 
> corners. There still seems to be too much body roll. I assume that it 
> is the springs. I'll be adding additional rate this year to the springs 
> in hopes of reducing lift. I plan to go to 600 lbs/in rear and at 
> least... 
> 
> 
> 
> This seems counter-intuitive to me. If the body were fixed to the rear 
> axle 
> (unsprung) and encountered the centrifugal force of cornering, the inside 
> wheel would have to lift, since the car's center of gravity is above the 
> axis of the wheels. However if there was the ability for the body to roll 
> to 
> the outside under those cornering forces, wouldn't that alleviate the 
> overturning forces being generated, thereby allowing the inside wheel 
> more 
> opportunity to stay in contact with the road? 
> Steve P. 
> _______________________________________________ 
> http://www.team.net/donate.html 
> 
> 
> Fot mailing list 
> Fot@autox.team.net 
> http://autox.team.net/mailman/listinfo/fot 
> _______________________________________________ 
> http://www.team.net/donate.html 
> 
> Fot mailing list 
> Fot@autox.team.net 
> http://autox.team.net/mailman/listinfo/fot 
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>