You can guess at the compression ratio, guess at the tire pressures, why not
guess on the gas supply?
The first two guesses probably won't leave you stranded out on the course,
but the last one can, easily..
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: "'jim hearn'" <jimhearn1@comcast.net>; "'Friends of Triumph'"
<fot@autox.team.net>
Sent: Tuesday, February 12, 2008 4:31 PM
Subject: Re: [Fot] Gas gauge in a fuel cell
>> I would quite happy with a
>> relative reading
>> (such one quarter is really one half) so I feel sure this
>> gauge will work
>> but just checking to see if anyone has had any experience
>> with this sort of
>> thing.
>
> If zero ohms is empty, then your TR6 gauge is going to work backwards. It
> expects 0 to be full.
>
> Don't recall what empty is offhand, but I think it's less than 90 ...
> meaning the gauge will read empty while you still have gas.
>
> One solution might be to fit a TR3 gauge, which expects 0 to be empty.
>
> Randall
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|