fot
[Top] [All Lists]

Re: [Fot] bent pushrod

To: "'Steven Preiss'" <spreiss@verizon.net>
Subject: Re: [Fot] bent pushrod
From: "Richard Taylor" <tarch@bellsouth.net>
Date: Tue, 13 May 2008 09:15:23 -0400
Now I'm wondering if my pushrod length could be the culprit for it jumping
out of the rocker socket. What's the drill for determining the proper
length?

RT


Subject: Re: [Fot] bent pushrod

Ted Schumaker of TSI Automotive also sells them (any length) and at a very
reasonable price.
S.P.
----- Original Message ----- 
From: "Richard Taylor" <tarch@bellsouth.net>
To: <N197TR4@cs.com>; "'"Steven Preiss"'" <spreiss@verizon.net>
Sent: Tuesday, May 13, 2008 2:28 AM
Subject: RE: [Fot] bent pushrod


>
>
> What is the source for the recommended light-weight, high strength, hot
dog
> pushrod?
>
> RT
>
> -----Original Message-----
> From: N197TR4@cs.com [mailto:N197TR4@cs.com]
> Sent: Sunday, May 11, 2008 7:15 PM
> To: "Steven Preiss"; "Richard Taylor"
> Subject: RE: [Fot] bent pushrod
>
> Richard,
>
> I think we are assuming that you will change the bent push rod and check
the
> rest, as Steve suggests.
>
> Joe
>
> >I would try to determine why the pushrod wandered off the rocker. One
> >possibility is that it became fatigued and bent during the race. I know
> that
> >the earlier narrow ones were upgraded in diameter because they tended to
> bend.
> >In that case I would replace them all with new ss ones. Or perhaps it was
> >adjusted too loose and wandered (or tight, and bent).
> >Either way, I would not think it wise to race on a once bent pushrod.
Seems
> >like that would be asking for disaster after having miraculously avoided
> it!
> >Steve P.
> >_______________________________________________
> >http://www.team.net/donate.html
> >
> >Fot mailing list
> >Fot@autox.team.net
> >http://autox.team.net/mailman/listinfo/fot
> >
> >You are subscribed as n197tr4@cs.com
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot


<Prev in Thread] Current Thread [Next in Thread>