Like using TR6 flat heater core as a supplementary radiator connected to the
heater lines coming right off the head and water pump housing and mounted in
the traditional oil cooler position down below the rad and in its own air
stream.
----- Original Message -----
From: "Craig" <wensley_Tr@comcast.net>
To: "Steven Preiss" <spreiss@verizon.net>
Sent: Wednesday, June 25, 2008 5:31 AM
Subject: Re: [Fot] cooling
> Need more input
> You lost me
> Craig
>
> ----- Original Message -----
> From: "Steven Preiss" <spreiss@verizon.net>
> To: <fot@autox.team.net>
> Sent: Monday, June 23, 2008 11:02 PM
> Subject: [Fot] cooling
>
>
> > Anyone tried using a TR6 heater core mounted down low like an oil cooler
> > and
> > connected to the heater lines to augment cooling capacity of the TR3/4
> > radiator?
> > Steve P.
> > _______________________________________________
> > http://www.team.net/donate.html
> >
> > Fot mailing list
> > Fot@autox.team.net
> > http://autox.team.net/mailman/listinfo/fot
> >
> > You are subscribed as wensley_tr@comcast.net
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|