Yes Kas I can appreciate the rules limitations back in "the day", and
no doubt that bending the chassis can and will change camber, but I
just can't see any good reason to do that today, especially on a later
TR with adjustable camber.
Just my opinion of course...
Glen
-----Original Message-----
From: Kas Kastner <kaskas@cox.net>
To: N197TR4@cs.com; RKramer@rdoequipment.com; jimhearn1@comcast.net;
fubog1@aol.com
Cc: fot@autox.team.net
Sent: Fri, 15 Aug 2008 2:18 pm
Subject: Re: [Fot] TR6 piece between radiator and motor
In the days of no allowances for "A" arm mods and ball joint changes it
worked just SWELL. You don't really think there is any tensional
rigidity in
a TR 3-4 frame do you?
----- Original Message -----
From: <fubog1@aol.com>
To: <N197TR4@cs.com>; <RKramer@rdoequipment.com>;
<jimhearn1@comcast.net>
Cc: <fot@autox.team.net>
Sent: Friday, August 15, 2008 11:03 AM
Subject: Re: [Fot] TR6 piece between radiator and motor
> "People might have differing opinions about this method of camber
> adjustment"
>
> ... well that much I agree with...!
>
> Glen
>
> -----Original Message-----
> From: N197TR4@cs.com
> To: RKramer@rdoequipment.com; jimhearn1@comcast.net
> Cc: fot@autox.team.net
> Sent: Thu, 14 Aug 2008 9:49 pm
> Subject: Re: [Fot] TR6 piece between radiator and motor
>
> In a message dated 8/14/2008 4:29:34 PM Central Daylight Time,
> RKramer@rdoequipment.com writes:
>
>
>> Joe Alexander had a custom brace on his car at Road America last
> year, a
>> test model of something he was thinking about selling. A custom
> designed
>> piece
>> like Joe's might be an aesthetic upgrade and solve your problem. He
> should
>> chime in any time now.....
>>
>>
>
> I have a aluminum tube that is anodized 'gold'.
> It has been in the car for two years.
> It is straight across as it doesnt have to miss any moving parts.
> It can be removed with one bolt and unscrewed from the other side.
> It can be adjusted (RH/LH Threads) to change camber.
> Kas liked it...(he took the tubes and sectioned them to induce more
> camber)
> Uncle Jack likes it. But hasnt done it yet....not a high priority.
> But it is easy to do and inexpensive.
> (far easier than doing a production run of steel flywheels)
> It does a plethora of things and it looks trick. (People might have
> differing opinions about this method of camber adjustment, but I like
> it)
>
> If there were enough interest, I could put some kits together on a one
> time
> basis (this winter) otherwise I have no plans for production.
> Thanks Mr. Kramer. I am pleased it caught your eye. </HTML>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|