Morty, what are you using for sway bars? Is your TR solid rear or IRS?
These numbers would seem very stiff for a TR6.
On Thu, Jan 22, 2009 at 7:11 AM, Gasket Works <gasket.works@verizon.net>wrote:
> #800lbs/inch for rear and #1000lbs/inch front
>
> M
>
> www.headgasket.com
> Gasket Works USA, LLC
> 626.358.1616 Voice
> 626.628.3777 Fax
> GMT -8 Pacific
> ----- Original Message -----
> From: "Dennis DeLap" <yellow-green@sbcglobal.net>
> To: "FOT" <fot@autox.team.net>
> Sent: Wednesday, January 21, 2009 3:47 PM
> Subject: [Fot] TR4/6 IRS Spring Rate
>
>
> > AMICI - specifically all of you TR4A,TR250,TR6 racers.
> > I am building a Triumph Special with Triumph IRS.
> > Can you give me a ballpark # that you are using for spring rate on the
> rear of your cars?
> >
> > Thanks
> > Dennis DeLap
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> >
> > http://www.fot-racing.com
> >
> > Fot mailing list
> > Fot@autox.team.net
> > http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
>
--
Chuck Arnold
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|