This confirms what I finally narrowed down as the cause of nasty fumes when
welding. Even just the fumes in the air from using brake cleaner in the
shop would cause bad smelling fumes when I weld. The fumes caused shortness
of breath and a lingering tight feeling in my chest. Scary stuff. I just
got some non-chlorinated brake cleaner that I hope will be OK.
Richard Good
----- Original Message -----
From: "Brad Kahler" <brad.kahler@141.com>
To: "Friends of Triumph" <fot@autox.team.net>; "Triumphs"
<Triumphs@autox.team.net>
Sent: Monday, December 21, 2009 5:03 PM
Subject: [Fot] brake cleaner and mig/tig welding - safety message
> Ran across this link on a lathe site I'm a member of. If you MIG or
> TIG weld this is something you really need to be aware of. It
> certainly opened my eyes to the dangers involved.
>
>
> http://www.brewracingframes.com/id75.htm
>
> Brad
> _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|