fot
[Top] [All Lists]

Re: [Fot] source for TR4 rear axle U bolts?

To: jhassall@blacksburg.net, fot@autox.team.net
Subject: Re: [Fot] source for TR4 rear axle U bolts?
From: n197tr4@cs.com
Date: Wed, 20 Jan 2010 14:43:27 EST
In a message dated 1/20/2010 12:01:31 PM Central Standard Time, 
jhassall@blacksburg.net writes:


> I'm looking for a source for 3/8" grade 8 U bolts (or bolt stock) for 
> the TR4 solid axle.  I've checked the usual suspects locally but no one 
> carries bolt stock that small.  Even utility trailer shops don't carry 
> stock smaller than 1/2".  Sheesh!
> 
> tia
> 
> jim
> 

I am not sure grade 8 is required.  Do you need them longer for lowering 
blocks?  You can go to 1/2" and have them custome made or they may have them 
on the shelf.  You drill the mounting plates O.S., of course.  It's a little 
tight, but I have done to two or three TRs when I was unable to find the 
3/8th".</HTML>
_______________________________________________

Support Team.Net http://www.team.net/donate.html

Suggested annual donation $12.96


http://www.fot-racing.com


Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought to you by Team.Net consulting - Unix software specialist.

<Prev in Thread] Current Thread [Next in Thread>