Hey membership,
Sent this last week and didn't get but one response, can anyone help me on
this??
I got a slug of blocks etc that I need help identifying, can you'll help??
Part Numbers that are cast into it somewhere on
the part
Intake Manifold 307265 V2989 A 1147 aluminum intake I think??
Gear reduction starter R-33037
Koni Shocks 80-1005
Trans Overdrive Unit 25/633301 015107 6 875 Laycock Tag info
Cannon Dual Intake 806 or 908 depends which way you hold it. Looks to
be an 1300/1500 dual Webber but I don't know.
Crankshaft WDB W2156 308737 17746N JOSB Supposedly a
new never run crank that has been hard chromed Mains are 2.3" and rods are
1.88"
Transmission 88306468 V3038 10 spline 1.15" Shaft
at the splines. Has aluminum bell housing with the slave @ 2 o clock and
starter on passenger side
Transmission 88306468 V3038 10 spline 0.90" Shaft
has aluminum bell housing with slave at 9 o clock and starter on left side
Block 311255 (between freeze plugs) FK5785HE, mains
are 2.44" recessed cylinder bores
Block 305380 (between freeze plugs) GA42748HE, by
dipstick is N111, mains are 2.130"
Block 307553 (between freeze plugs), Been decked so
no deck surface number, mains are 2.44" and the bore is 2.94"
Head 6 Port N61 by lifter area, T27, 304955
Head 8 port with D shaped exhaust outlet, 367871,
56
Head 8 port with round exhaust port outlet, RKO,
27B6, 0589
Crane Camshaft F-244 210-8, BN3437
Flywheel Aluminum with replaceable friction area steel
insert, 50-522
Pistons 17753B
Carrillo rods Big end 2.0", small end 0.810, center to center
is 6.0"
Cam bearings 1-363, CSB612, 730883M, 84-25-970
Push rods New chrome moly 6.0" length???
Thanks so much for any help you can provide.
Mark Craig
Diesel Performance Parts, INC.
411 Allied Drive
Nashville, TN 37211
866-455-7788 Phone
615-834-9923 Fax
www.dieselperformanceparts.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|