fot
[Top] [All Lists]

Re: [Fot] use of BRONZE GUIDES

To: Joe N197TR4 <N197TR4@cs.com>, "Gt6steve@aol.com" <Gt6steve@aol.com>,
Subject: Re: [Fot] use of BRONZE GUIDES
From: "Reed, John" <John.Reed@wilson.com>
Date: Fri, 4 Nov 2011 14:39:07 -0500
I've used bronze guides for many years, never a problem. Key is a trusted
machinist as Steve states. Mine has been building British race engines for
more than thirty years. He even tapered the guides for flow without even being
asked.
Now he is swamped prepping heads for Japanese cars.

John


On 11/4/11 10:04 AM, "Joe N197TR4" <N197TR4@cs.com> wrote:

Outstanding posts on this subject.

Thank you everyone.

RISK MANAGEMENT.....with the information made available, so far,  folks can
make a more intelligent decision about who they have do their heads and be
able to ask better questions.

Thanks again....keep the comments coming.   It's good to see the FOT LIST
alive and well.

It might be good to know the trusted source of the best bronze guides.

Joe A



-----Original Message-----
From: Gt6steve <Gt6steve@aol.com>
To: Gregmogdoc <Gregmogdoc@surfnetusa.com>; fot <fot@autox.team.net>; n197tr4
<n197tr4@cs.com>
Sent: Fri, Nov 4, 2011 9:23 am
Subject: Re: [Fot] Zinc Additive.  now use of BRONZE GUIDES



I was about to make a post very similar to Greg's posting.  I explored this
with my trusted machinist after watching several instances of stuck valves in
TR4 heads.  He explained that it was the silicon-bronze guides that were
causing all the trouble and recommended going to the manganese-bronze as Greg
has stated.  I've had no issues with that advice.  Knock on Wood ;-))
Steve



In a message dated 11/3/2011 3:37:17 P.M. Pacific Daylight Time,
Gregmogdoc@surfnetusa.com writes:
We have   found that Manganese-Bronze guides have greater "lubricity"
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/john.reed@wilson.com




John Reed
Global Staff Photographer
Creative Services

[cid:3403262347_419753878]

Wilson Sporting Goods Co.
8750 W. Bryn Mawr Ave, Chicago IL 60631: USA
T: 1 773.714.6895    F: 1 773.714.4585
John.Reed@wilson.com  http://www.wilson.com  http://www.amersports.com



This e-mail may contain confidential and/or privileged information. If you are
not the intended recipient (or have received this e-mail in error) please
notify the sender immediately and destroy this e-mail. Any unauthorized
copying, disclosure or distribution of the material in this e-mail is strictly
forbidden.

[demime 1.01d removed an attachment of type image/png which had a name of 
image.png]
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>