fot
[Top] [All Lists]

Re: [Fot] Weber carb jetting

To: "Bob Davis" <rdavis4@cfl.rr.com>, <fot@autox.team.net>
Subject: Re: [Fot] Weber carb jetting
From: "Greg Solow" <gregmogdoc@surfnetusa.com>
Date: Sun, 26 Feb 2012 13:11:08 -0800
The jetting is probably not far off, but the carbs are really to small for 
the size and breathing capacity of the engine for racing. The largest size 
chokes made for a 40 dcoe is 36 mm. We have found on the dyno that 45 dcoe 
carburators on a full race 87mm engine use 38mm chokes with 5.0 auxiliary 
venturies for best power throughout the rpm range. Smaller chokes than that 
start to kill the power above 5500 rpm without helping lower down, this 
would be with a cam of over 295 degrees duration where the engine "comes on 
the can" about 3800 rpm. If you are using a cam that is shorter than 290 
degrees duration, smaller chokes might be ok. for the best power in the 
range the engine will be running.
                                                                             
                            Greg Solow 
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>