fot
[Top] [All Lists]

Re: [Fot] 7" PAUTER RODS?

To: "'Joe Alexander'" <n197tr4@cs.com>, <fot@autox.team.net>
Subject: Re: [Fot] 7" PAUTER RODS?
From: "john hasty" <jhhasty@gdhs.com>
Date: Wed, 7 Mar 2012 11:03:49 -0500
Delivered-to: fot-archive@autox.team.net
Delivered-to: fot@autox.team.net
List-archive: <http://autox.team.net/pipermail/fot>
List-help: <mailto:fot-request@autox.team.net?subject=help>
List-id: Friends of Triumph <fot.autox.team.net>
List-post: <mailto:fot@autox.team.net>
List-subscribe: <http://autox.team.net/mailman/listinfo/fot>, <mailto:fot-request@autox.team.net?subject=subscribe>
List-unsubscribe: <http://autox.team.net/mailman/options/fot>, <mailto:fot-request@autox.team.net?subject=unsubscribe>
References: <8CEC94A17035F1C-AC0-6776@webmail-d099.sysops.aol.com><CAMJWJcEihV9fOvj+yVgm0_80+4E1MxPXuOnZFdOuHT_XEvOoBQ@mail.gmail.com><8CEC9CC341F746C-1794-97E2@webmail-m069.sysops.aol.com><CAMJWJcFxk+UzajM13nUF=LeO57zxooyYa0-ANSpfDU2O0N6Lbw@mail.gmail.com><8CECA175544D10A-1794-D706@webmail-m069.sysops.aol.com><CAMJWJcEPELc47Cut6Xz5EAuY9n3hdeaYfe7xJWYut3MKoqUq5g@mail.gmail.com> <8CECA869BCD2268-20A0-1315@Webmail-m106.sysops.aol.com>
Thread-index: Acz8cIOFGXbMcAzKQSS8n7sF3g09jQAC0Xew a=m3xKc4gfKU8A:10 a=4XwCEAaBuO8A:10 a=kj9zAlcOel0A:10 a=B8rx5kvwQHCoTlY5PM2Gsg==:17 a=mkkZP590AAAA:8 a=zOoktvdPAAAA:8 a=pGLkceISAAAA:8 a=k0i7qWdVAAAA:8 a=JcvzPq48AAAA:8 a=4nnmwGuHPVFGDrwcLQUA:9 a=No-lFkcSV7d_G2DiZ3oA:7 a=CjuIK1q_8ugA:10 a=J0aUVQLP0FIA:10 a=qtyMPpPvNdoA:10 a=JFLLmj4W_BAA:10 a=JgL6sTUlBcsA:10 a=0vksvMZRuTEA:10 a=Ki9j9A26RgQA:10 a=m3MdUl94G8cA:10 a=uWM2GsfHPyAA:10 a=LuNFSA0Xe1kA:10 a=MSl-tDqOz04A:10 a=7ziGmj9GWucA:10 a=QWWNrRXKIcoFljd6:21 a=4EszOp9CBp0-nRpm:21 a=B8rx5kvwQHCoTlY5PM2Gsg==:117 reip=0.000, cl=1, cld=1, fgs=0
Joe:  Am sending you pictures of the 7" SCAT small block Chevy rods and JE
pistions we are using. 


John H. Hasty
Attorney At Law
Guthrie, Davis, Henderson & Staton, P.L.L.C.
719 East Boulevard
Charlotte, North Carolina 28203-5113
Tele: (704) 372-5600
Fax: (704) 372-4601
E-mail: jhhasty@gdhs.com
www.gdhs.com
 
PRIVILEGE AND CONFIDENTIALITY NOTICE:  This message (and any attachments) is
intended only for the use of the addressee and may contain information that
is PRIVILEGED and CONFIDENTIAL, and/or may contain ATTORNEY WORK PRODUCT.
If you are not the intended recipient, you are hereby notified that any
dissemination of this communication is strictly prohibited.  If you have
received this communication in error, please erase all copies of the message
and its attachments and notify us immediately.  Thank you.
 
IRS CIRCULAR 230 NOTICE:  In order to comply with certain IRS regulations
regarding tax advice, we inform you that, unless expressly stated otherwise,
any tax advice contained in this communication (including any attachments)
is not intended or written to be used, and cannot be used, for purposes of
(i) avoiding penalties under the Internal Revenue Code or (ii) promoting,
marketing or recommending to another party any transaction or matter
addressed herein.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Joe Alexander
Sent: Wednesday, March 07, 2012 9:35 AM
To: fot@autox.team.net
Subject: [Fot] 7" PAUTER RODS?

 Anyone have any experience with 7.00" RODS?

This is an inquiry from some I apparently met in Portland, OR

He refers to a similar kit from Cambridge.

TIA.





-----Original Message-----
From: John Styduhar <johnstydo@gmail.com>
To: Joe Alexander <n197tr4@cs.com>
Sent: Wed, Mar 7, 2012 5:26 am
Subject: Re: Message from The Vintage Racer



By the way, do you have any experience building up a long rod 4 pot.  I've
been talking with Pauter and they can make up a set of 7" rods and Wiseco
pistons for the 87 mm sleeves.  This is similar to the setup that Cambridge
Motorsports sells using Carrilo rods and JE pistons.  I can't seem to find
any specs in the service manual on the stock piston compression height ( I
think it's 2") or ring landing locations to see if the wrist pin on the long
rod will intersect the oil scraper ring groove.  This is not a stroker kit,
but Cambridge advertises that longer conrods reduce piston speed and contact
area.
What do you think?


On Tue, Mar 6, 2012 at 8:18 PM, Joe Alexander <n197tr4@cs.com> wrote:

 John,
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net



<Prev in Thread] Current Thread [Next in Thread>