i think most folks know that SU needles can be used in Stromberg carbs with
the use of shim stock.
thought i would mention it, anyway.
it provides a lot of choices
Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711 (cell)
n197tr4@cs.com
-----Original Message-----
From: Robert M. Lang <lang@isis.mit.edu>
To: gregmogdoc <gregmogdoc@surfnetusa.com>
Cc: fot <fot@autox.team.net>
Sent: Wed, Mar 28, 2012 6:58 am
Subject: Re: [Fot] Best Stromberg Carbs
Hi,
Speaking of which - what needles are folks using in their TR6's with
Strombergs? I installed alternate needles a while back, and never wrote
down what they are. I'm pretty sure they're B1AR's from a Jag, but I
cannot confirm that (yet).
In any case, these needles seem to be a tad rich and I need to confirm
that with a couple of chassis dyno runs.
In the meantime, I'd appreciate any feedback on the matter.
The following is an interesting article on replacing the fixed needles on
the early c cylinder federal spec. carbs (TR250 and early TR6):
http://www.buckeyetriumphs.org/technical/Carbs/AdjNeedle/AdjNeedle.htm
regards,
rml
---------------------------------------------------------------------------
Bob Lang Triumph TR6!! | This space for rent
Former NER Solo Chair |
Voice:617-253-7438 | Cell: 339-927-4489
---------------------------------------------------------------------------
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net
|