fot
[Top] [All Lists]

Re: [Fot] TR4 crank

To: <westerneagleracing@att.net>, <fot@autox.team.net>
Subject: Re: [Fot] TR4 crank
From: "Greg Solow" <gregmogdoc@surfnetusa.com>
Date: Wed, 2 May 2012 22:22:41 -0700
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
List-archive: <http://autox.team.net/pipermail/fot>
List-help: <mailto:fot-request@autox.team.net?subject=help>
List-id: Friends of Triumph <fot.autox.team.net>
List-post: <mailto:fot@autox.team.net>
List-subscribe: <http://autox.team.net/mailman/listinfo/fot>, <mailto:fot-request@autox.team.net?subject=subscribe>
List-unsubscribe: <http://autox.team.net/mailman/options/fot>, <mailto:fot-request@autox.team.net?subject=unsubscribe>
Organization: Engine Room
References: <1336000983.88432.YahooMailRC@web180713.mail.sp1.yahoo.com>
Reply-to: Greg Solow <gregmogdoc@surfnetusa.com>
Sender: fot-bounces@autox.team.net
Yes, a properly prepared, nitrided, stock crank is good for 6800 rpm and 160 hp for a long time with light rods, pistons, and an aluminum flywheel with a diaphragm clutch. It does not need a damper on the front. It does need nice radiuses on all of the journals, a good balance, and nitriding is essential. Greg Solow _______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>