fot
[Top] [All Lists]

Re: [Fot] Steering shaft u-joint TR-4

To: ponobill@gmail.com, mike.mehl@yahoo.com
Subject: Re: [Fot] Steering shaft u-joint TR-4
From: Joe Alexander <n197tr4@cs.com>
Date: Mon, 15 Oct 2012 09:49:32 -0400 (EDT)
Cc: fot@autox.team.net
Delivered-to: fot-archive@autox.team.net
Delivered-to: fot@autox.team.net
References: <20121015015012.C3ADA2C0CE4@autox.team.net> <771cd099-24c5-4a4b-aa4e-871d8a94e45d@email.android.com> <A0BD44BE-D158-4E02-8C10-ACDE859BA9E9@bnj.com>
A pair of TR6 U-JOINTS has our replacement parts for the TR4 and Ambro.

Note: I was side by side with an early Lotus 7, at the back straight at
Mosport, when his steering went adrift. Interesting watching this drama unfold
all of the way to the Jersey barriers. Scraping stop to some damage and no
injuries from about 100 mph.





Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4@cs.com





-----Original Message-----
From: Bill Babcock <ponobill@gmail.com>
To: Mike Mehl <mike.mehl@yahoo.com>
Cc: fot <fot@autox.team.net>
Sent: Sun, Oct 14, 2012 11:30 pm
Subject: Re: [Fot] Steering shaft u-joint TR-4


With good reason. Nothing like having those rag joints come apart--say when
you're doing 100 plus and aiming straight at some ARMCO barriers in the front
straight at Sears Point.

The shaft size for TRs is pretty small too.

On Oct 14, 2012, at 9:25 PM, Mike Mehl <mike.mehl@yahoo.com> wrote:

> Tony
> Look at Pegasus part number 1492-32.  I put those on my car.   I was
worried
about the rubber ones.
> Mike
>
> Sent from my Kindle Fire
>
>
>
> _____________________________________________
> From: Tony Drews <tony@tonydrews.com>
> Sent: Sun Oct 14 18:53:25 PDT 2012
> To: fot@autox.team.net
> Subject: [Fot] Steering shaft u-joint TR-4
>
>
> My steering shaft has two u-joints in it. The lower one is a big
> beefy cast thing that I bought from Moss to replace the big beefy
> cast thing that was there before. The upper one isn't quite as heavy
> duty looking but does a much better job of actually clamping onto the
> shaft. I've tightened the sh** out of the lower big beefy one and
> it's still not as tightly clamped as I'd like.
>
> So... Where can I buy alternate u-joints for the TR-4 steering shaft?
>
> Look forward to the advice.
>
> Tony Drews
>
> PS - article on front suspension swap to TR-6 stuff is still coming.
> _____________________________________________
>
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/mike.mehl@yahoo.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net



<Prev in Thread] Current Thread [Next in Thread>