fot
[Top] [All Lists]

Re: [Fot] Rear camber for a TR6

To: Kas Kastner <kaskas@cox.net>
Subject: Re: [Fot] Rear camber for a TR6
From: Mike Munson <fasttrs@yahoo.com>
Date: Wed, 6 Feb 2013 08:42:04 -0600
Cc: fot <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <348367C0D47E4CA183E4E4FDAD3E80CF@Bud> <1360124638.16216.YahooMailRC@web184804.mail.gq1.yahoo.com> <CAMc4sNA=bbnXUf9RYQhU-UuVitrya6MJO=TQz8j54a+3u5rZJA@mail.gmail.com> <SNT120-W56A29FC94096D5CFF45118DF070@phx.gbl>
With bias ply tires I use 3/4 neg, 1/16 toe in with 600# Springs a 1.5 hollow
adjustable sway bar and a Lincoln Locker. I have a slight bit of oversteer.
Always run take-off tires from higher level drivers. (thanks Sam)
I do use a probe type pyrometer.
Car is 2160 to 2200 as raced.
>From what I saw last spring Tony doesn't spend enough time on the ground to
build much heat into his tires.:-)
How much does the TR250K weigh anyway?

Mike


Sent from my iPhone

On Feb 6, 2013, at 12:22 AM, Kas Kastner <kaskas@cox.net> wrote:

> It depends  on how it handles for your style of driving.  2 degrees sounds
> like way too much.  One degree seems about right.  When the squat or
conerning
> roll comes in, that negative increases a lot.  Thus so does the understeer
> (that's Mr. Slow). Tire temps are not reliable unless they are taken almost
> instantly when leaving the last corner. Not with a heat gun either, but
must
> be with a needle probe. With the kind of tires used in this type of racing
I
> don't really think they mean ANYTHING. Get some feel into it.  Your ass
will
> tell you when it is good.  Unless you have swing axles negative camber is
SLOW
> SLOW SLOW.
>
> Never be beaten by equipment
>> Date: Tue, 5 Feb 2013 20:59:55 -0800
>> From: triosan@gmail.com
>> To: sherryjimmy6116@att.net
>> CC: fot@autox.team.net
>> Subject: Re: [Fot] Rear camber for a TR6
>>
>> Will be interesting to see responses. For my TR6 race car I have 800 pound
>> springs in the rear with Spax adjustable shocks set to almost maximum
firm.
>> Reading the tire temps tells me that about 1 degree negative is correct.
>> Many have told me that 2 to 2.5 is best. But I gotta think the tires do
not
>> lie and so I am running with 1 degree.
>>
>> What do you think Garmey and Babcock?
>>
>> On Tue, Feb 5, 2013 at 8:23 PM, sherry robyn
> <sherryjimmy6116@att.net>wrote:
>>
>>> Has anyone done any experimenting on the best performing rear camber on a
>>> TR6?
>>> Thanks, Jim
>>> _______________________________________________
>>> fot@autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/fot/triosan@gmail.com
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/kaskas@cox.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>