That should have been lobe center at 107 not 108.
On 10/5/2013 12:00 PM, Larry Young wrote:
> Isn't the 0.013 supposed to be cam lift, not valve lift? I find it is
> much more accurate to set the cam by lobe center. At 0.013 you can get
> a lot of error because the lift changes so slowly. If the lobe is
> symmetric the center is at 108 for the 42-76 numbers. I would suggest
> you thoroughly degree the cam, i.e. measure the entire profile for #1
> inlet and outlet. You can then determine what you've got regarding
> duration, lobe separation, profile symmetry, etc. I explain how on my
> website and provide a sample spreadsheet
> (http://tildentechnologies.com/Cams/Tips_Takes.html). Let me know if
> you need some help.
> Larry Young
>
> On 10/4/2013 Isn't2:05 PM, Joe Guinan wrote:
>>
>> I know I have TDC on the crank set correctly. I'm seeing 42 degrees
>> on the
>> degree wheel when the dial indicator on the top of the pushrod shows the
>> valve has opened .013 inch.
> Ex
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|