fot
[Top] [All Lists]

Re: [Fot] Dialing in more rear brakes

To: Joe Boruch <jaboruch@netzero.com>
Subject: Re: [Fot] Dialing in more rear brakes
From: "Chuck Arnold and/or Kathleen Kelley" <triosan@gmail.com>
Date: Mon, 28 Oct 2013 21:19:34 -0700
Cc: Friends <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <20131028.205646.32567.1@webmail10.dca.untd.com>
I use one also
 On Oct 28, 2013 7:07 PM, "Joe Boruch" <jaboruch@netzero.com> wrote:

> Have you tried a residual pressure valve for the rear?  When i had rear
> drums
> I used a Wilwood 10 psi residual pressure valve.  A RPV won't change the
> bias,
> but will keep the wheel cylinders from retracting so far, so that the rear
> brakes come in sooner.  Joe(B)
>
> ---------- Original Message ----------
> From: steve <colordog.1@earthlink.net>
> To: FOT <fot@autox.team.net>
> Subject: [Fot] Dialing in more rear brakes
> Date: Sat, 26 Oct 2013 14:46:22 -0700 (GMT-07:00)
>
> Friends,
>
> I've recently added dual-circuit brakes with a Tilton balance bar assembly
> to
> my TR3 and I can't seem to get enough rear brakes. I'm looking for some
> advice.
>
> Here's what I have done so far:
>
> Installed balance bar with front and rear Master Cyl's 2.5" apart.  The
> pushrods are parallel to each other.  Both Master Cyl's were .750  I'm not
> running any residual pressure valves.
>
> The pedal felt like a brick so I switched to two .625 MC's.  The pedal feel
> was much better but still, even with the adjustment to full rear, the rears
> were barely starting to drag when the fronts were biting.
>
> I switched the rear Cyl to .700 and, same thing.  The rears just start to
> hook
> up when the fronts can not be turned by hand.
>
> Next, I switched the rear cyl to .750 and it feels the same.  All of my
> testing is up on jackstands in the garage.  I'm racing next weekend.
>
> I've played with adjusting the pushrod lengths so that the balance bar is
> parallel during full braking as illustrated in the Tilton instruction
> sheet.
>
> Overall, the brakes work well but I can't figure this one out on my own.
>
> Any ideas?
>
> ~STEVE
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/jaboruch@netzero.net
>
> ____________________________________________________________
> 30-second trick for a flat belly
> This daily 30-second trick BOOSTS your body&#39;s #1 fat-burning hormone
> http://thirdpartyoffers.netzero.net/TGL3231/526f07e1e14f67e1534fst03duc
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/triosan@gmail.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>