fot
[Top] [All Lists]

Re: [Fot] Exhaust Header

To: "'john hasty'" <jhhasty@gdhs.com>
Subject: Re: [Fot] Exhaust Header
From: "Van Mulders Marcel" <van.mulders.marcel@telenet.be>
Date: Wed, 30 Oct 2013 16:26:31 +0100
Cc: fot@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <63718fb7.663c.1420584cb1d.Webtop.53@optonline.net> <B14E52BB4CD4466FAD2699086B4BBE64@GebruikerPC> <5958BABFDC00458DBC0EE48ABE01E039@gdhs.local>
Thread-index: Ac7U124ROgTZkH1EQ4Cplg8AbIDDWgAlgvmgAAJy8bAAAx0NcA==
Thanks john. 1 5/8" is 41mm : that is the diameter most 4 cylinder TR racers
have fitted I believe. I will try these over the winter and eventually
replacing the 38mm(outer diameter) primaries on my car.I will look at the
Stahl website. Do you know the length of the primary exhaust tubes on y our
car? Very nice car b.t.w. and very neat underbonnet!
Marcel 

-----Oorspronkelijk bericht-----
Van: john hasty [mailto:jhhasty@gdhs.com] 
Verzonden: woensdag 30 oktober 2013 15:10
Aan: 'Van Mulders Marcel'; 'Todd Redmond'
CC: fot@autox.team.net
Onderwerp: RE: [Fot] Exhaust Header

Marcel: The Stahl headers I had made are 1 & 5/8 inches ID (46mm?)16 gage
tubes. Pictures attached.  Very good workmanship.  I also had themceramic
coated along with the intake here locally which I am told reduces the heat
radiated by 35%.  Stahl should have the specifications they used under my
name.  Cost $747 USD. They are in York PA and may be going out of business
at the end of the year....


John H. Hasty
Attorney At Law
Guthrie, Davis, Henderson & Staton, P.L.L.C.
719 East Boulevard
Charlotte, North Carolina 28203-5113
Tele: (704) 372-5600
Fax: (704) 372-4601
E-mail: jhhasty@gdhs.com
www.gdhs.com
 
PRIVILEGE AND CONFIDENTIALITY NOTICE:  This message (and any attachments) is
intended only for the use of the addressee and may contain information that
is PRIVILEGED and CONFIDENTIAL, and/or may contain ATTORNEY WORK PRODUCT.
If you are not the intended recipient, you are hereby notified that any
dissemination of this communication is strictly prohibited.  If you have
received this communication in error, please erase all copies of the message
and its attachments and notify us immediately.  Thank you.
 
IRS CIRCULAR 230 NOTICE:  In order to comply with certain IRS regulations
regarding tax advice, we inform you that, unless expressly stated otherwise,
any tax advice contained in this communication (including any attachments)
is not intended or written to be used, and cannot be used, for purposes of
(i) avoiding penalties under the Internal Revenue Code or (ii) promoting,
marketing or recommending to another party any transaction or matter
addressed herein.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Van Mulders Marcel
Sent: Wednesday, October 30, 2013 8:47 AM
To: 'Todd Redmond'
Cc: fot@autox.team.net
Subject: Re: [Fot] Exhaust Header

 I'm interested in an exhaust header for my TR3 race car because the tubes
on my header are only 37.5mm or
1 1/2" outer diameter and most 4cylinder TR race cars seem to run with 42mm
tubes. What do you think?
Marcel Van Mulders

-----Oorspronkelijk bericht-----
Van: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Namens
Todd Redmond
Verzonden: dinsdag 29 oktober 2013 19:41
Aan: FOT@autox.team.net FOT@autox.team.net
Onderwerp: [Fot] Exhaust Header

Friends


Looking for a header for the TR3. What are you using and where did you get
it?


4 into 1 is preferred


Thanks
Todd
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>