Uh-oh. Here comes the "transmissions" discussion again :-)
Scott B.
-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of malaboge@aol.com
Sent: Thursday, August 28, 2014 3:12 PM
To: fot@autox.team.net
Subject: Re: [Fot] Carb spacers & velocity stack lengths
snip
One could say I've done a little work on my manifold.
Specifically welded the snott out of it and created the proper taper to the
runners.
snip
I too did a bit of "adding material" to an intake and got put on the trailer
at an event back in the day! Luckily I brought another unmodified intake as I
knew this was going to be a "verbal" confrontation at least.
What clubs are allowing this sort of mods? Around here (Nor Cal) the clubs
adhere to the old SCCA rules...
isn't that sort of the definition
of vintage?
Nick in Nor Cal
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/sbarr@mccarty-law.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|