fot
[Top] [All Lists]

[Healeys] SU carb reamer needed

Subject: [Healeys] SU carb reamer needed
From: greylinn at ozemail.com.au (Peter & Veronica)
Date: Wed, 25 Jan 2017 07:24:26 +1000
References: <CAPTa0B5kr7CWvyZdk=WdcJPyp726SDO+5sZ84d2xpStEqREmeQ@mail.gmail.com> <1907327788.2172939.1485213304768@mail.yahoo.com> <01B049C3-8DA6-499C-A315-FD23812245F8@gmail.com>
....also as an impecunious student back in the '70s with an MG TD I bought 
oversize spindles. I can't remember now if these went in but were tight, or if 
I drilled the carb body to just under the shaft size. Any way I 'fitted' them 
by lapping them with something like Brasso with the spindle in an electric 
drill.

Cheers

Peter 
Brisbane

BN1 V6
MG TC special (under construction)

From: Neil McDonald 
Sent: Tuesday, January 24, 2017 9:55 PM
To: Michael MacLean 
Cc: Austin Healey 
Subject: Re: [Healeys] SU carb reamer needed

With adequate resources it's clear that addressing both the shaft and bushing 
would be the optimum solution. However as an impoverished student over 50 years 
ago I recall changing out the throttle shafts on my Sprite, at minimal cost, 
convincing myself that this made a difference! Joe Curto wants around $500 to 
rebuild a pair of SUs. Now as a retiree I have more resources but still need to 
manage how much money I spend on my hobby.

If the wear is limited, maybe shaft replacement only might be cost effective?
_____________________ 
Neil McDonald
BN6

Email: nmcd10 at gmail.com


On 23 Jan 2017, at 23:15, Michael MacLean <rrengineer.mike at att.net> wrote:


  Might be a better idea to send out the bodies to someone like Joe Curto and 
have them reamed and re-bushed for a standard shaft.  

  Mike MacLean




  On Monday, January 23, 2017 11:06 AM, Michael Oritt <michael.oritt at 
gmail.com> wrote:




    I have H6 carbs on my 100 Le Mans and the 5/16" throttle shafts are loose.  
I would like to go ream out the bodies and go to the oversized .320" throttle 
shafts.  Moss wants $270.00 for the reaming tool and I do not anticipate I will 
need to do this job again during my lifetime.  Does anyone have one of these 
they would be willing to loan or rent?

    Best--Michael Oritt  

    _______________________________________________
    Support Team.Net http://www.team.net/donate.html
    Suggested annual donation  $12.75
    Archive: http://www.team.net/archive
    Forums: http://www.team.net/forums

    Healeys at autox.team.net
    http://autox.team.net/mailman/listinfo/healeys

    Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/rrengineer.mike at att.net




  _______________________________________________
  Support Team.Net http://www.team.net/donate.html
  Suggested annual donation  $12.75
  Archive: http://www.team.net/archive
  Forums: http://www.team.net/forums

  Healeys at autox.team.net
  http://autox.team.net/mailman/listinfo/healeys

  Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/nmcd10 at 
gmail.com




--------------------------------------------------------------------------------
_______________________________________________
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys


-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170125/c1a5674c/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>