--===============4595893313290706696==
--000000000000aa2e98057faef128
Does anyone have experience with the square o-ring needed for TR3A split
calipers ("B" style with bolt down pad retainers)?
The seal recess in these measures 9/16" diameter, compared to the later 16P
calipers that have a 1/2" diameter seal recess.
The o-rings I just received from Moss (583-821) measure 1/2", same as the
seals for the 16P calipers. Moss is at least looking into it, but they
don't have any more on the shelf to check.
Does anyone know of a source for these?
Jason
--000000000000aa2e98057faef128
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">Does anyone have experience with the square o-ring needed =
for TR3A split calipers ("B" style with bolt down pad retainers)?=
<div><br></div><div>The seal recess in these measures 9/16" diameter, =
compared to the later 16P calipers that have a 1/2" diameter seal rece=
ss.</div><div><br></div><div>The o-rings I just received from Moss (583-821=
) measure 1/2", same as the seals for the 16P calipers.=C2=A0 Moss is =
at least looking into it, but they don't have any more on the shelf to =
check.</div><div><br></div><div>Does anyone know of a source for these?</di=
v><div><br></div><div>Jason</div></div>
--000000000000aa2e98057faef128--
--===============4595893313290706696==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/pipermail/fot
--===============4595893313290706696==--
|