We used an electric impact tool with a 42 mm socket --took about 3 seconds !
Lou
BN1
San Diego AH Club
>With the engine out of the car, it's a bit of a challenge to undo the
>crank nut without the engine turning- I'm thinking of making a
>bracket that would hold the clutch to the back plate, but my friend
>has offered to come by with air tools. Anyone have another trick for
>this if I get impatient?
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|