healeys
[Top] [All Lists]

Re: [Healeys] Clutch removal

To: simon.lachlan@alexarevel.plus.com, 'Healeys' <healeys@autox.team.net>
Subject: Re: [Healeys] Clutch removal
From: Bob Haskell via Healeys <healeys@autox.team.net>
Date: Fri, 3 Sep 2021 07:41:40 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <000001d7a0b3$f34451d0$d9ccf570$@alexarevel.plus.com>
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.10.0
Simon,

Starter out?  Use a large, flat blade screw driver, through the starter 
opening in the back plate, between the ring gear teeth.

Cheers,

Bob Haskell
Austin Healey 3000 BN7/BT7 registrar

On 9/3/21 7:07 AM, Simon Lachlan via Healeys wrote:
>
> Thank you all for your interesting replies and comments.
>
> The saga continues.
>
> 1) The OD is on the workshop/garage floor thanks mainly to my 
> son-in-law who is that most useful thing, a VERY strong and willing 
> assistant in heavy matters.
>
> 2) The gearbox and OD are going ?oop north? on Monday. (Get up at 
> 04:00 to be at OD Spares for 08:30).
>
> 3) That part of the UK contains the majority of car-related things, 
> places, suppliers, workshops etc in the UK.  For example, AH Spares, 
> Ahead4Healeys and JME Healeys are 13, 3 & 21 miles from OD Spares 
> respectively.
>
> Now, I?m almost certainly going to buy the 3-part kit that consists of 
> clutch, cover and bearing. I want to take the old assembly out and 
> take it up with me for assessment. Just in case any of it?s OK. (It?ll 
> have to be very OK for it not to be recycled).
>
> Q1) Right now, I?ve looked at the manual which suggests that one 
> removes the cover first. Surely that?s not necessary if one?s going to 
> remove the whole issue?
>
> Q2) I?m faced with 6 bolts, none of which want to turn. They?ve been 
> there for my 25 years and who knows how long before that??.When I put 
> any torque(?) into turning them, the engine rotates and whatever 
> effort I?m putting out is absorbed by the engine?s rotation. Fair 
> enough. I propose to take off the sump cover and jam the engine with a 
> big chunk of timber. And then try again. The oil is dripping out as I 
> type. Is there a better way of doing this?? Some clever trick that 
> enable one to get these nuts off??
>
> Thanks, Simon
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>

_______________________________________________

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

ox.team.net


<Prev in Thread] Current Thread [Next in Thread>