Thanks, I'll print this and give it too the front
end guy.
Dick
--- Keith Turk <kturk@ala.net> wrote:
> Camaro has 5.9 degrees of caster and the Camber
> is at 0 I think.... very
> little toe in at speed..... maybe 1/8th of an
> inch....
>
> K
>
> ----------
> > From: Dick J <lsr_man@yahoo.com>
> > To: Keith Turk <kturk@ala.net>;
> land-speed@autox.team.net
> > Subject: Camaro setup
> > Date: Friday, February 16, 2001 3:11 PM
> >
> > --- Keith,
> > I know you had your control arms modified, I
> > remember the comments about "certified
> welder" or
> > something like that, but, how much caster are
> you
> > running. I'm going to get mine aligned again
> > next week. I changed out the upper control
> arm
> > this time, (which the guy told me was a
> little
> > bent but not so bad that he thought it would
> > hurt) and I'm replacing all bushings with
> > urethane. I also dropped the rear end down a
> > bunch and that in itself would be enough to
> > change the front end caster. I know when I
> went
> > through this line of questioning the first
> time I
> > got everything from 4 to 22 degrees from
> > different racers, and each seemed to work for
> > that car. Since your in a Camaro too, I
> figured
> > I'd try to get close to what you run. Do you
> have
> > any idea what the standard street setting is
> for
> > that?
> >
> >
> >
> > =====
> > Dick J
> > In East Texas
> > Get personalized email addresses from Yahoo!
> Mail - only $35
> > a year! http://personal.mail.yahoo.com/
> >
=====
Dick J
In East Texas
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
///
/// land-speed@autox.team.net mailing list
///
|