Camaro has 5.9 degrees of caster and the Camber is at 0 I think.... very
little toe in at speed..... maybe 1/8th of an inch....
K
----------
> From: Dick J <lsr_man@yahoo.com>
> To: Keith Turk <kturk@ala.net>; land-speed@autox.team.net
> Subject: Camaro setup
> Date: Friday, February 16, 2001 3:11 PM
>
> --- Keith,
> I know you had your control arms modified, I
> remember the comments about "certified welder" or
> something like that, but, how much caster are you
> running. I'm going to get mine aligned again
> next week. I changed out the upper control arm
> this time, (which the guy told me was a little
> bent but not so bad that he thought it would
> hurt) and I'm replacing all bushings with
> urethane. I also dropped the rear end down a
> bunch and that in itself would be enough to
> change the front end caster. I know when I went
> through this line of questioning the first time I
> got everything from 4 to 22 degrees from
> different racers, and each seemed to work for
> that car. Since your in a Camaro too, I figured
> I'd try to get close to what you run. Do you have
> any idea what the standard street setting is for
> that?
>
>
>
> =====
> Dick J
> In East Texas
> Get personalized email addresses from Yahoo! Mail - only $35
> a year! http://personal.mail.yahoo.com/
///
/// land-speed@autox.team.net mailing list
///
|