land-speed
[Top] [All Lists]

Header Flange Advice Sought...

To: <land-speed@autox.team.net>, "JYTURBO" <jyturbo@yahoogroups.com>
Subject: Header Flange Advice Sought...
From: "DrMayf" <drmayf@teknett.com>
Date: Sun, 25 Nov 2001 16:49:45 -0800
Dinking around with whatever I can sans shop and thought I would ask a
question about the turbo headers. My headers are block hugger type and have
a single piece flange where it bolts to the heads. Turbo headers get hot.
Hot means expansion. So would I be better off cutting the long single flange
plate into four smaller ones with one hole slotted at each port? This would
permit expansion without putting anything into a bind...or would it? Heads
are aludimum. Of course, as soon as I cut them, they will sproing all out of
shape wont they? Murphy's Law or some such.

mayf, the red necked ignorant desert rat in Pahrump..without a shop...yet

///
///  land-speed@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe land-speed
///
///  or go to  http://www.team.net/cgi-bin/majorcool
///
///


<Prev in Thread] Current Thread [Next in Thread>