It all depends ont he tire you use. Typical Goodyears would mount on a 4.5
to 5.5 x 15" wheel. The big M/T's fit on 6 to 7 x 18" wheels. The Goodyear
Talladega's fit on 8 to 9 x 15".
John
----- Original Message -----
From: "Allen Young" <riveroak@cncnet.com>
To: "landspeedracer" <landspeedracer@msn.com>; "Dave Dahlgren"
<ddahlgren@snet.net>; <land-speed@autox.team.net>
Sent: Wednesday, February 06, 2002 8:08 PM
Subject: Re: lakester steel rear wheels
> John,
>
> What is a better wheel width for an LSR application? How narrow should
one
> go?
>
> Allen
>
> ----- Original Message -----
> From: "landspeedracer" <landspeedracer@msn.com>
> To: "Dave Dahlgren" <ddahlgren@snet.net>; <land-speed@autox.team.net>;
> "Allen" <riveroak@cncnet.com>
> Sent: Wednesday, February 06, 2002 2:07 PM
> Subject: Re: lakester steel rear wheels
>
>
> > Most circle track wheels are from 8 to 10 inchs wide. Are you going to
run
> > tires that wide?
> >
> > John
> > ----- Original Message -----
> > From: "Dave Dahlgren" <ddahlgren@snet.net>
> > To: <land-speed@autox.team.net>
> > Sent: Wednesday, February 06, 2002 1:13 PM
> > Subject: Re: lakester steel rear wheels
> >
> >
> > > you might ask them about inflation pressure limits as circle track
cars
> > for the
> > > most part run a lot less air pressure in the tires..
> > > Dave
> > >
> > > Allen Young wrote:
> > >
> > > > List,
> > > >
> > > > I'm in the process of getting the rear wheels for my
> > lakester-in-process.
> > > > Does anyone know of or had any experience with the BART racing
wheels
> as
> > sold
> > > > through the Summit catalog? They are billed as "circle track"
wheels.
> > Steel,
> > > > full 360 degree welded and fairly inexpensive. Are these suitable
for
> > my
> > > > application? If not, any suggestions?
> > > >
> > > > Allen in Oroville
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
|