OK, Now we have a 3.0 liter V6 DOHC motor for the liner. In order to
measure the motor for class "F" I will need to measure the bore and
stroke. The stroke will be easy as the spark plug hole is like a Hemi.
But before I spend a great deal of time and burn some brain cells ( if I
have any left) I don't need to use up coming up with a way to measure
the bore, I was hoping someone has already designed a tool to do this.
This is my first race motor that does not have push rods, 3 too many
camshafts, 2 too few cylinders and no distributor or carburetor. Doug
Odom in big ditch
|