land-speed
[Top] [All Lists]

Re: Are 1/4" holes allowed in frame tubes to run chute cables?

To: Askotto@aol.com
Subject: Re: Are 1/4" holes allowed in frame tubes to run chute cables?
From: Joe Timney <joetimney@dol.net>
Date: Thu, 27 Jul 2006 11:55:12 -0400
My recommendation would be to weld a tube thru the tubing. It is 
important to keep salt out of the inside of the chassis.

joe

Askotto@aol.com wrote:

>The safest place for my 16' long chute cables is inside the frame tubes. My  
>Frame is 1 7/8" OD x .120 wall mild steel tubing. 




<Prev in Thread] Current Thread [Next in Thread>