land-speed
[Top] [All Lists]

Re: Fuel Cell Vent with Rollover Safety

To: Benn <karhu@california.com>, land-speed@autox.team.net
Subject: Re: Fuel Cell Vent with Rollover Safety
From: James Tone <gmc6power@earthlink.net>
Date: Thu, 31 May 2007 13:21:34 -0700 (GMT-07:00)
Ok let's be resonable about these vents. You all watch the NHRA drags on 
Saturday and Sunday right? What do you think that air flow device is on the top 
of a TF body near the front of the body. It's an air vent. They pressurize it 
by air flow to make sure the fuel pumps don't starve. Probably has the same 
flow as the line back to the pumps. 

If your running a -6 to from the pump to the carb/inj etc: a -6 will be enough. 
Same for an -8 or a -10...Good Luck

>Subject: Re: Fuel Cell Vent with Rollover Safety




<Prev in Thread] Current Thread [Next in Thread>