land-speed
[Top] [All Lists]

Re: [Land-speed] tiny holes

To: "Rich Fox" <v4gr@rcn.com>, "landspeed@autox.team.net"
Subject: Re: [Land-speed] tiny holes
From: "Glen Barrett" <speedtimer@beyondbb.com>
Date: Tue, 25 Sep 2007 11:15:26 -0600
Good idea Rich, I use center drills for 99% of the holes I drill. I also 
step drill to the larger sizes and in some cases ream for a good fit. Us old 
aircraft people were taught the proper way.
Glen
----- Original Message ----- 
From: "Rich Fox" <v4gr@rcn.com>
To: "landspeed@autox.team.net" <land-speed@autox.team.net>
Sent: Tuesday, September 25, 2007 10:51 AM
Subject: [Land-speed] tiny holes


>I understand your not wanting to invest to heavily in five holes. If you 
>can,
> it would be a big help to just touch the work piece with an "0" center 
> drill
> or smaller first. Gives the bit a good start on a straight hole.
> _______________________________________________
> speedtimer@beyondbb.com
>
> Land-speed mailing list
>
> http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________

Land-speed mailing list

http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>