land-speed
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Land-speed] tiny holes

from [Rich Fox] [Permanent Link][Original]
To: "landspeed@autox.team.net" <land-speed@autox.team.net>
Subject: [Land-speed] tiny holes
From: "Rich Fox" <v4gr@rcn.com>
Date: Tue, 25 Sep 2007 09:51:43 -0700 
I understand your not wanting to invest to heavily in five holes. If you can,
it would be a big help to just touch the work piece with an "0" center drill
or smaller first. Gives the bit a good start on a straight hole.
_______________________________________________

Land-speed mailing list

http://autox.team.net/mailman/listinfo/land-speed
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Land-speed] Drilling teeny holes..., Todd
Next by Date:  Re: [Land-speed] tiny holes, Glen Barrett
Previous by Thread:  [Land-speed] drilling tiny holes, Dan Wright
Next by Thread:  Re: [Land-speed] tiny holes, Glen Barrett
Indexes:  [Date] [Thread] [Top] [All Lists]