The simplest thing might be to just start the test at a higher engine speed
(say 5000). You can spend a lot of time (as you've found out) trying to make
something work when it might be that the engine won't run at WOT with the
(pick one) pump pressure, stack length, camshaft, or?? your running. You know
it
works in the truck so how bad can it be?
Next if you can't do a sweep test do a steady state test. Test at 500 rpm
intervals to peak speed, thats how we used to do it.
Good Luck!
Mike
_______________________________________________
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|