Congrats on the 20th day. (Wish I had the grits to quit something . . .
.)
Its ok to burn your fingers. Its NOT ok to do it more than once. (don't
ask)
David in Durango
-----Original Message-----
From: land-speed-bounces+davidadin=mercydurango.org@autox.team.net
[mailto:land-speed-bounces+davidadin=mercydurango.org@autox.team.net] On
Behalf Of Keith Turk
Sent: Tuesday, October 30, 2007 7:52 AM
To: land-speed@autox.team.net
Subject: [Land-speed] shop comments sorta... ( no LSR )...
It's not fair to say this isn't really an LSR problem... cause stuff
like this
happens to all of us, It's just that most of you are smart enough not
to
report it on a regular basis...
So... there I was... making some cute brackets for a wiring loom...
basically
they are 1/2" wide 1.5" long bits of aluminum with three holes drilled
in
them... one 1/4" hole and two 1/8th" holes. You mount it with the big
hole
and use the little holes to wire tie the wires in place.
That's the project... not to complicated eh?...
I didn't like the way the Shear cut the metal so I took it over and used
the
band saw to do all the cutting ... just a bit of planning and the whole
thing
was going simply rosey... Kept all my finger tips and everything...
ahhh
but now we get to the heart of the matter and the reason for this over
winded
e-mail in the first place... Those dang band saws leave a rough edge
and a
fella oughta take these tiny things over to the horizontal belt sander
and
have a go at cleaning up those edges don't ya think? (This is for my
32
roaster project... so tidy work is always required...)
Did ya know that Aluminum is a great transferor of Heat energy? No
Really it
is... I promise... if you try and hold one of these little brackets
while
it's rubbing itself off with the belt the dang thing creates friction..
and
friction creates ... yep... Heat... ( pretty fancy stuff eh? )
Betcha can guess how long a man can stand the heat of the fire here
can't
ya... Yep... NOT long... and just like them burners on the stove... YOU
will
rapidly remove your fingers from the source of the Heat... and once you
do...
this little bracket, Well it takes off for parts unknown. Where...
Hmmm
don't know... here's what I know... The speed of the belt in
conjunction
with the light weight of the material involved ... virtually guarantee's
you'll never find it... Keeping your eye on the ball here isn't
possible when
your primary objective is to stuff your hand in your mouth.
Always keep in mind that it takes less time to make a new bracket if you
have
to move the sander, drill press, bench, and tool boxes to find the old
one...
and oh by the way... I already told you that you weren't going to find
it...
( no matter how much you love the challenge )
So there you go... Life continues to be Good...
Keith ( 20 days without Nicotine )
_______________________________________________
davidadin@mercydurango.org
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|